AG-50DS3 Features
AG-50DS3 Control Panel
CHANNEL-1
INPUT-1: Combo input designed
for both MIC level (Balanced XLR) or Instrument level (1/4")
signals.
BASS: Adjusts the amount of cut
or boost in the low frequency range.
TREBLE: Adjusts the amount of
cut or boost in the high frequency range.
VOLUME: Controls the overall volume
level of CHANNEL-1.
CHANNEL-2
INPUT-2: Combo Input designed
for both MIC level (Balanced XLR) and Instrument level (1/4")
signals.
(CH-1)(CH-2): (DIGITAL EFX Assign):
This 3 way toggle switch allows the digital effects to be
routed to CH-1, CH-2, or if in the middle position will supply
effects for both channels.
LEVEL: (DIGITAL EFX) Controls
the amount of digital effect mixed in to the guitar signal
from 0% to 50%
MODE: (DIGITAL EFX) This is a
rotary encoder, which selects 1 of 16 different digital effects.
See
Digital Effects Program List.
VOLUME: Controls the overall volume
of CHANNEL-2.
BASS: Adjusts the amount of cut
or boost in the low frequency range.
TREBLE: Adjusts the amount of
cut or boost in the high frequency range.
NOTCH FILTER HZ: Provides selectable
frequency shift of the 18db cut NOTCH FILTER from 100Hz -
350Hz to eliminate resonant feedback.
NOTCH FILTER ON/OFF: - Enables
or disables the notch filter control.
SHAPE ON/OFF: This toggle switch
enables or disables the SHAPE control. The shape control is
a mid dip control. In the on position the mid frequencies
will be cut and the high and low frequencies will be boosted.
MASTER VOLUME: Adjusts the overall
loudness of the amplifier.
PILOT LIGHT/LIMIT INDICATOR: When
GREEN, this LED indicates that the power is turned on. If
the power amplifier reaches full power output, the on board
Limiter will be enabled and this LED will turn RED. The Limiter
allows the amplifier to be played at full power without unwanted
distortion.
AG-50DS3 Back Panel
AC INPUT: Connect the female end
of the AC line cord here. Connect the male plug to a suitable
source of line voltage. Refer to the voltage information on
the back of the amplifier for its voltage and current requirements.
This connector also acts as the main fuse holder and includes
a compartment for a spare fuse.
POWER: This rocker switch turns
the AC power ON and OFF.
EFX F.S.:
This jack is for connection to a shorting footswitch. When the
switch is closed the on board Digital EFX will be bypassed.
EFX SEND: Output for supplying
signals to external low-level effects or signal processing
equipment.
EFX RETURN: Input for returning
signals from external low-level effects or signal processing
equipment.
MONO LINE OUT: This jack provides
an unbalanced out put from the preamp that is post eq and
post efx. This send can be used to feed a signal to a recording
or sound reinforcement mixer. Additionally this output can
be used to drive a slave amp such as the ULTRASOUND AG-50E.
STEREO LINE OUT: This jack provides
an unbalanced stereo output that is post eq and post efx.
This send can be used to feed a stereo signal to a recording
or sound reinforcement mixer. Additionally, with the use of
a "Y" cable, this stereo output can be used to drive 2 slave
amps, such as the ULTRASOUND AG-50E in stereo mode.
HEADPHONES: This jack provides
a stereo signal to drive headphones. When playing with one
of the stereo effects such as Chorus or Flange, the stereo
separation is very evident. The use of this jack will disengage
the amplifiers internal speakers.
DIRECT OUT: This XLR jack provides
a balanced output signal, post eq and post efx, used to feed
recording or sound reinforcement equipment.
|
